Side Cover L / Speaker Harness Assy / Handset Holder Assy (For Models With Handset) - Brother DCP-7090 Service Manual

9.9 Side cover L / Speaker harness ASSY /
Handset holder ASSY
(1) Remove the Taptite bind B M4x12 screw.
(2) Release the Hooks A, B, and the Hook C on the Side cover L in order of the arrow A to C,
and remove the Side cover L.
Note:
• When removing the Side cover L, DO NOT pull the Side cover L strongly because
it is connected to the Speaker harness ASSY and the Hook harness (for models
with Handset).
(3) Disconnect the Speaker harness ASSY from the Main PCB ASSY.
(4) Disconnect the Hook harness from the Main PCB ASSY. (For models with Handset)
Main PCB ASSY
Taptite bind B
M4x12
Speaker
harness
ASSY
Side cover L
B
Hooks B
Harness routing: Refer to
(For models with Handset)
C
Hook C
Hook
harness
"1. Handset holder ASSY, Speaker harness
Speaker harness ASSY
Fig. 3-21
3-34
Hook harness
A
Hooks A
ASSY".
Confidential