Creating and Recalling Diagnostics Presets
The Store and Recall options in the Edit Options window allow you to save and recall preset diagnostics configurations.
NOTE: Presets are saved via cookies, so they do not persist across multiple browsers/computers.
1.
Click the Presets down arrow to open a list of previously stored Presets. By default, the only preset is called 0: All Devices, All
Notif ications. This default Preset cannot be modified.
2.
Select an empty Preset (for example 1:)
3.
Select the desired diagnostic options, and click Store.
4.
A popup window prompts you to name this Preset. Enter a name and click OK.
To recall an existing Preset, select it from the drop-down list and click on Recall.
NOTE: A Preset MUST be Recalled before clicking the Update button. If you do not press this button, none of the f ields or checkboxes
are modif ied or selected. In essence, all options become disabled.
Manage System - Server Options
Click the Server link (in the Manage System tab) to access the Server Options page (FIG. 55). The options on this page allow you to:
Change the port numbers (used by the Master for various Web services)
Configure the SSL settings used on the Master
Manage existing and pending license keys, manage the active NetLinx system communication parameters
Configure/modify the SSL certificates on the target Master
Server Options page
FIG. 55
The options on this page are described below:
Port Settings
Allows a user to modify the server settings; specifically those port assignments associated with individual services.
All items can be either enabled/disabled via the Enabled checkboxes.
The port number values (except the FTP port) can be modified in this page.
The default port for each service is listed to the right.
Server Port Settings
The following table describes each of the Port Settings presented on this page:
Server Port Settings
Feature
Telnet:
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Description
The port value used for Telnet communication to the target Master. Enabling this feature allows future communication with
the Master via a separate Telnet application (such as HyperTerminal).
• The default port value is 23.
• Refer to the NetLinx Security with a Terminal Connection section for more information on the related procedures.
WebConsole - System Options
51