AMX NI-700 Webconsole & Programming Manual page 29

Sample NetLinx Workspace window (showing OnLine Tree tab)
FIG. 30
NOTE: If the control card f irmware is not up to date; download the latest f irmware f ile from www.amx.com > Tech Center >
Downloadable Files > Firmware Files > NXC-XXX. In this example, the NXC-VOL card contains out-of-date f irmware and requires
build 1.00.09.
5. If the NXC card firmware being used is not current, download the firmware file by first logging in to www.amx.com and then
navigate to Tech Center > Firmware Files and from within the NetLinx section of the web page locate the NXC card entries.
6. Click on the desired Kit file link and after you've accepted the Licensing Agreement, verify you have downloaded the NetLinx
NXC card firmware (Kit) file to a known location.
7. Verify you have downloaded the latest NetLinx Control Card firmware (Kit) file to a known location.
8. Select Tools > Firmware Transfers > Send to NetLinx Device from the Main menu to open the Send to NetLinx Device dialog
(FIG. 31). Verify the target's Device and System numbers matches the value listed within the System folder in the Workspace
window.
Select Control Card firmware file for download page (via IP)
FIG. 31
9. Select the Control Card's Kit file from the Files section (FIG. 31) (in our above example we chose to update the NXC-VOL4
card).
10. Enter the System and Device numbers associated with the desired Master (listed in the Workspace window). A device value of
00003 is the same as a value of 3.
11. Click the Reboot Device checkbox to reboot the NI unit after the firmware update process is complete and then re-detect the
new NXC card firmware.
12. Click Send to begin the transfer. The file transfer progress is indicated on the bottom-right of the dialog (FIG. 31).
13. Click Close once the download process is complete.
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Selected Control Card
Firmware file
NI Master
Control cards (NI-4x00 ONLY)
Device Controller
Description field for selected Kit file
Firmware download
status
System Number and Device Number
must match the System and Device values
listed in the Workspace window
Upgrading Firmware
29