Viewing And Editing User Security Settings; Deleting A User - AMX NI-700 Webconsole & Programming Manual

6. Enable the security access rights you want to provide to the user. See the Group and User Security Access Options section on
page 39 for details.
7. Click the Accept button to save your changes to the Master.
NOTE: Any security changes made to the Master from within the web browser are instantly reflected within a Terminal session
without the need to reboot.

Viewing and Editing User Security Settings

Click on any User listed in the User Security Details page to view and edit security settings for the selected User (FIG. 45):
User Level Security Settings Page (Viewing User Security Settings Details)
FIG. 45
Click the Edit button to edit the Security Access options for the selected User.

Click Delete to delete the selected User from the Master.


Deleting a User

1. Select the User Level tab (in the Security section) to open the User Security Details page.
2. Press the Delete button to remove the selected User and refresh the page. The system will prompt you to verify this action -
click OK to proceed.
If you are not logged into the Master, you receive a reminder message: "You must login before Security Settings can be
changed". In this case, log into the Master and repeat the previous steps.
3. Reboot the Master via the Reboot button on the Manage System Page (select the System control button to access).
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Click to edit Access settings for this User
Click to delete this User
WebConsole - Security Options
42