Resetting The Master Controller To The Factory Defaults Configuration; Manage System - Control/Emulate Options; Controlling Or Emulating A System Device - AMX NI-700 Webconsole & Programming Manual

Resetting the Master Controller to the Factory Defaults Conf iguration
Click the Reset To Factory Defaults button. This resets the Master to its' factory default state. This includes:
Removal of all security settings

Removal of all user files

Resetting to DHCP

Loading an empty NetLinx program.

Once reset, the Master will be effectively in an out-of-box state.
NOTE: It may be necessary to refresh the browser window after the master has f inished booting (click Refresh).

Manage System - Control/Emulate Options

Click the Control/Emulate link (in the Manage System tab) to access the Control/Emulate Options page (FIG. 48). The options on
this page allow you to Control or Emulate a device connected to this Master.
Device Control/Emulation is accomplished by manipulating a target device's channels, levels, and sending both send commands
and strings to the device.
To Control a device means that the program generates messages which appear to a specified device to have come from the

Master.
To Emulate a device means that the program generates messages which appear to the Master to have come from a specified

device (physical or virtual). When Emulate is selected, a Push button is added to the Channel Code section (see FIG. 48).
Manage System (Control/Emulate)
FIG. 48
NOTE: The System Number, Device Number, and Port Number f ields are read-only. Instead of specifying these values for a System
Device, select a device via the Device Tree to populate these f ields with that device's information.

Controlling or Emulating a System Device

1. Select the device that you want to Control or Emulate, via the Device Tree:
Click the Show Device Tree option to show the Device Tree window (if it is not already enabled).
a.
In the Device Tree, click on the Information (i) icon for the device that you want to control or emulate. This opens a
b.
Network Settings page showing network configuration details for the selected device. See the Device Network Settings
Pages section on page 33 for details.
Click on the Control/Emulate link. This opens a Control/Emulate Options page for the selected device (FIG. 49).
c.
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Push button only displayed if
Emulate is selected
WebConsole - System Options
45