Manage Devices - User-Defined Devices; Adding A User-Defined Device - AMX NI-700 Webconsole & Programming Manual

Manage Devices - User-Def ined Devices
Click the User-Def ined Devices link (in the Manage Devices tab) to access the User-Def ined Devices page (FIG. 69). This page
provides a listing with all of the dynamic devices that have been discovered in the system, and allows you to add and delete User-
Defined Devices.
System - Manage Devices (User-Defined Devices)
FIG. 69
Adding a User-Def ined Device
1. Click the Add Device button (in the User-Defined Devices page) to access the Add User Def ined Device page (FIG. 70):
User-Defined Devices - Add User Defined Device
FIG. 70
2. Fill in the device information fields, as described in the following tables:
User-Def ined Device Information Fields
Address:
Category:
SDK Class:
GUID:
Make:
Model:
Revision
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Enter the address of the physical device in the Address field. This information can be either the NetLinx Master port value
(D:P:S) or an IP Address (#.#.#.#).
Use the drop-down list to select the control method associated with the physical target device (IR, IP, Serial, Relay, Other).
Use the drop-down list to select the closest Device SDK class type match for the physical target device. The SDK-Class
Types table (below) provides a listing of the available choices.
Enter the manufacturer-specified device's GUID (Global Unique Identification) information. Either the GUID or Make/Model
must be specified in this field.
Enter the name of the manufacturer for the device being used (ex: Sony, ONKYO, etc.)
• Up to 55 alpha-numeric characters
• Either the GUID or Make/Model must be specified within this field.
• Spaces in the name will be converted to underscores.
Enter the model number of the device being used (ex: Mega-Tuner 1000)
• Up to 255 alpha-numeric characters
• Either the GUID or Make/Model must be specified within this field.
Enter the firmware version used by the target device.
• Text is required within this field.
• The version must be in the format: major.minor.micro (where major, minor, and micro are numbers). An example is: 1.0.0
(revision 1.0.0 of the device firmware).
WebConsole - System Options
65