Manage Devices - Device Number; Manage Devices - Control/Emulate - AMX NI-700 Webconsole & Programming Manual

Manage Devices - Device Number

With the Master selected in the Device drop-down menu, click the Device Number link (in the Manage Devices tab) to access the
Change Device Number page (FIG. 78). The options on this page allow you to change the device number on the Master.
System - Manage Devices (Device Number)
FIG. 78
Default = 0 (zero)

Note that in most cases, the Device Number for Masters should remain set to zero.


Manage Devices - Control/Emulate

With the Master selected in the Device drop-down menu, click the Control/Emulate link (in the Manage Devices tab) to access the
Control/Emulate Options page (FIG. 79).
Manage System (Control/Emulate Options)
FIG. 79
This page can also be accessed via the Manage System options, as described in the Manage System - Control/Emulate
Options section on page 45. See the Controlling or Emulating a System Device section on page 45 for details.
NetLinx Integrated Controllers (Firmware v4)- WebConsole & Programming Guide
Push button only displayed if
Emulate is selected
WebConsole - System Options
71