Getting Started; Setting The Battery And A Memory Card; Inserting The Battery And A Memory Card - Ricoh WG-6 Operating Manual

Getting Started

Setting the Battery and a Memory Card

Inserting the Battery and a Memory Card

SD memory cards, SDHC memory cards, and SDXC memory cards can be
used with this camera. "Memory card" refers to these memory cards in this
manual.
1
Make sure that the camera power is off.
2
Slide the release lever on the bottom
of the camera toward OPEN, and slide
the battery/card cover to the right to
open it.
3
Make sure that the memory card is
facing the right way and then push
the card all the way in until it clicks.
To remove it, press in the memory card and
then release your hand.
4
Insert the battery.
Use the rechargeable battery (DB-110) to
press the latch and insert the battery all the
way into the battery compartment.
To remove the battery, slide the latch.
5
Close the battery/card cover and slide
it to the left.
Slide the battery/card cover until it clicks and
confirm that it is closed securely.
1
2
2
31