Power Saving Settings; Automatically Turning The Power Off; Dimming The Display - Ricoh WG-6 Operating Manual

Power Saving Settings

Automatically Turning the Power Off

The camera turns off automatically if no operations are made for a certain
period of time. Set the time until the the camera is turned off in [Auto Power
Off ] of the E menu.
Memo ---------------------------------------------------------------------------------------------------------
• [Auto Power Off] is not available in the following cases.
• During shooting in the B mode or in [Interval Shooting] of the T mode
• During movie playback or slideshow
• During data processing
• While the camera is connected to a computer
• During FlashAir connection
5

Dimming the Display

The camera dims or turns off the display automatically if no operations are
performed during the set time. The following settings can be set in the E
menu.
Power Saving
Monitor Auto off Delay
If the camera is operated, the original brightness and display are restored.
84
Dims the display automatically if no operations are performed during the set time
to suppress battery drain.
Select the time until the display is dimmed from [5sec.], [15sec.], [30sec.], [1min.],
and [2min.].
Turns the monitor off automatically if no operations are performed during the set
time.
Select the time until the the monitor is turned off from [1min.], [5min.], and
[30min.].