Shooting - Ricoh WG-6 Operating Manual

Shooting

Problem
Shooting cannot be The battery is exhausted.
performed by pressing
The camera is turned off or not in
z.
the shooting mode.
The memory card is not
formatted.
The memory card is full.
The memory card has reached
end of its service life.
The memory card is locked.
The memory card contacts
are dirty.
Images cannot be Confirmation time is too short.
checked after shooting.
The monitor is blank. The monitor brightness is dark.
The monitor is off.
An AV device is connected to
the camera.
The camera is unable The lens is dirty.
to focus in autofocus
The subject is not at center
mode.
of frame.
The subject is not suitable for
autofocus.
The subject is too close.
Images are blurred. The camera was moved when
z is pressed.
When shooting in a dark place,
taken images become easily
blurred.
The flash does not A function preventing flash
discharge. operation is selected.
The flash is not
The battery is exhausted.
charged.
Cause
Charge the battery.
Turn the camera on or press z
to switch the camera to the shooting
mode.
Perform [Format [Card]] of the
E menu.
Insert a new card, or delete
unwanted files.
Insert a new memory card.
Unlock the card.
Clean with soft, dry cloth.
Change the setting of [Confirm.
Time] in the D menu.
Adjust the brightness of the monitor
in the E menu.
Press e to turn the monitor on.
Remove the cable from the camera. p.67
Clean with soft, dry cloth.
Lock the focus for shooting.
Lock the focus or set the focus mode
to [MF] for shooting.
Use [Macro] for shooting or move
away from the subject.
Hold the camera with your elbows
pressed against your body, or use
a tripod.
Use a flash, or set [Setting] to a high
ISO sensitivity.
Check the settings and mode.
Charge the battery.
Solution
p.33
p.35
p.37
p.68
p.38
p.83
p.18
p.49
p.47
p.52
p.50
p.33
Page
—
—
—
6
—
—
—
—
101