Troubleshooting; Power Supply - Ricoh WG-6 Operating Manual

Troubleshooting

Power Supply

Problem
The camera does not
turn on.
The camera turns off
during use.
6
The camera does not
turn off.
The low battery indica-
tor is displayed or the
camera turns off even
when a fully charged
battery is installed.
The battery cannot be
charged.
The battery is quickly
exhausted.
100
Cause
The battery is not inserted.
The battery is exhausted.
The battery is not inserted in the
correct orientation.
The battery is incompatible.
The AC adapter is not correctly
connected.
The [Auto Power Off] function
has been activated because the
camera was not operated for a
certain period of time.
The battery is exhausted.
The camera is malfunctioning.
The battery is incompatible.
The battery has reached the end
of its service life.
The battery is hot.
Ambient temperature is very
high or very low.
Solution
Charge the battery and correctly
insert it into the camera.
Use the battery DB-110 exclusively
developed for this camera.
Connect the AC adapter correctly.
Turn the camera back on.
Charge the battery.
Take the battery out and insert
it again.
Use the battery DB-110 exclusively
developed for this camera.
Replace the battery with a new one.
Let the battery cool down to ambient
temperature.
—
Page
p.33
—
p.99
p.35
p.33
p.31
—
—
—
—