Ricoh WG-6 Operating Manual page 104

Problem
Images are too bright. Flash output is not appropriate. Move away from the subject
Images are too dark.
The colors of images
are unnatural.
The monitor brightness
changes during
autofocus.
Electronic level indica-
tors are not displayed.
6
The image is not level
although level indicator
showed that the
camera was level.
102
Cause
The monitor brightness is not
appropriate.
The monitor brightness is not
appropriate.
The exposure compensation is
set to a negative value.
The camera is unable to adjust
white balance for shooting con-
ditions using auto white balance.
Ambient lighting is poor or dif-
fers from that used for autofocus.
Electronic level indicators are
hidden.
The camera was moving during
shooting because you were on
a moving object or due to other
causes.
The subject is not level.
Solution
or use a different light source.
Adjust the brightness of the monitor
in the E menu.
Adjust the brightness of the monitor
in the E menu.
Change the exposure compensation
value.
Include a white object with the sub-
ject or select the settings other than
[Auto WB] for [White Balance].
This is normal and does not indicate
a malfunction.
Check the setting of [Level Setting]
in the D menu.
Do not move the camera during
shooting.
Check the subject.
Page
—
p.83
p.83
p.43
p.54
—
p.82
—
—