Setting The Direction Information - Ricoh WG-6 Operating Manual

Saving Logs
You can save the recorded logs to the memory card as a file.
1
Select [Save log data] on the screen in Step 2 on p.88, and
press d.
2
Select [NMEA] or [KML], and press e.
The log file is saved in the "GPSLOG" folder in the memory card with the file
name composed of the serial number 001 to 999 and the month and day.
(Example: 001_0505)
Memo ---------------------------------------------------------------------------------------------------------
• You can check the log file by using a software supporting the file on a computer.
• When deleting the log file, select [Discard log data] on the screen in Step 2. The log file cannot be
deleted with [Format [Card]] in the
5
Caution -------------------------------------------------------------------------------------------------------
• If the memory card is not available for recording, the log file cannot be saved.
• When the GPS information has not been acquired, the log file is not saved.

Setting the Direction Information

You can set the direction information displayed on the shooting screen in
the D menu.
Compass Heading
Compass Calibration
Declination
90
E menu.
Sets the displayed information.
Executes the adjustment of the compass.
Hold the camera with one hand and move it slowly like drawing the figure 8. When
the adjustment is completed, a beep sounds.
Select from [TRUE] and [MAG].
When the GPS information has not been acquired, the information for [TRUE] is
not displayed.