Getting Started; Installing Batteries - Ricoh Caplio RR330 User Manual

Getting Started

You can use either 2 AA size batteries (Alkaline, Ni-MH) to power the camera.

Installing Batteries

1.
Make sure the camera is turned off.
2.
Slide the battery cover.
3.
Insert the batteries, noting correct polarity (+ and -).
4.
Close the battery cover firmly.
Note
• A CR-V3 Lithium battery pack can also be used as the power supply.
• If you will not be using the batteries for an extended period of time, remove them from the camera to prevent leakage or corrosion.
• Never use manganese batteries.
• Never use batteries of different type (together) or mix old and new batteries.
• Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and reduce camera
performance.
14