Fitting The Programmable Room Thermostat - ESI ESRTPRF User And Installation Instructions Manual

Fitting the Programmable Room Thermostat

Product Positioning
The ideal position to locate the Programmable Room
Thermostat is about 1.5m above floor level, in a location
where the thermostat is accessible, reasonably lit and free
from extremes of temperature and draughts. Do not
position the thermostat near sources of heat, such as
radiators, lights, TV, direct sunlight or on an outside wall.
Installation
1. Remove the front cover using a flat screwdriver (Fig.1)
and separate from back plate (Fig.2).
2. If required, fix the back plate directly on the wall using
suitable wall plugs and screws or mount over existing wall
box (Fig.3). Alternatively, use the stand provided.
3. Insert the 2 x AA batteries provided (Fig.4) and replace
the front cover of the thermostat.
21