Maintenance; Fitting The Programmable Cylinder Thermostat - ESI ESCTP5-RF Installation Instructions Manual

Maintenance

2.4
Always isolate the mains supply before commencing any work,
servicing or maintenance on the system. And please read all
instructions before proceeding.
Arrange for an annual maintenance and inspection schedule to
be carried out by a qualified person on every part of the heating
and hot water system.

Fitting the programmable cylinder thermostat

2.5
The ideal position to locate the programmable cylinder
thermostat is about 1.5m above floor level, and about 1m from
the cylinder probe pocket, in a location where the thermostat is
accessible, visible and free from extreme temperatures. Some
cylinders allow for the thermostat to be mounted directly into
the cylinder, please check with your cylinder manual for details,
alternatively the thermostat can be mounted to a wall close to
the cylinder, always ensuring that the temperature probe can
reach the probe pocket in the cylinder.
1.5m
1m
9