Changing The Programme: 24Hr - ESI ESRTPRF User And Installation Instructions Manual

Changing the Programme: 24 Hr
1. Press and hold SET then press PROG until all the days of
the week are flashing (1, 2, 3, 4, 5, 6 ,7) ① (Fig.10).
2. Press PROG once and the time will flash ② (Fig.10).
Adjust the time for P1 using the +/– buttons if required.
3. Press PROG again and the temperature setting for P1
will flash ③ (Fig.10). Adjust the temperature if required.
4. Repeat steps 2 and 3 for programmes 2 – 6 if required.
5. Press SET to confirm new settings and return the
programmaer to Auto/Run mode.
①
②
③
Fig.10
N.B! Programme times are only adjustable in 10 minutes
segments.
14