Temporary Manual Overrides - ESI ESRTPRF User And Installation Instructions Manual

Temporary Manual Overrides

1. To temporarily override the Wireless Programmable
Room Thermostat status or temperature press the + or –
buttons. The hand symbol ① (Fig 4.) will appear on
screen.
2. Press the + button to increase the set temperature in
increments of 0.5°c and/or press the - button to decrease
the set temperature in increments of 0.5°c.
3. Once the desired temperature is reached (and after
approx 6 seconds) the time display will be replaced by a
display indicating the time left to the next programme (the
length of time the temporary override will run, if left
unhindered). When the next ON/comfort programme is
arrived at, the temporary override will end and Auto mode
is reactivated.
4. Press SET to cancel this function and reactivate Auto
mode.
Day Number
①
Fig.4
8