Using The Copy Function; Setting Delayed Start And Optimum Start - ESI ESRTPRF User And Installation Instructions Manual

Using the Copy Function

The unit is provided with a copy function which allows an
adjusted programme to be copied to another day or set of
days. This avoids the necessity of re-entering a desired
programme for another day or sets of days.
To operate the copy function
1. Press and hold the COPY button for 3-4 seconds until the
Day 1 symbol flashes in top left corner of screen.
2. Press the +/- button to get to the day you want to copy.
Press COPY and the day number stops flashing.
3. Press the +/- button to arrive at the day that you want
to copy to. Press COPY.
4. Press SET to lock in changes and return to Auto mode.
It is possible to copy Day 1, or 2 or 3 etc. to 7 Day setting or
5/2 Day setting. Just choose the day (or block of days) that
you wish the selected day copied to. You can also copy a 5
Day block of settings to the 2 Day block, 7 Day block or the
24HR block.

Setting Delayed Start and Optimum Start

1. Push "DAY" once, and then "PROG" once.
2. It will display "DAY:0-2". 0 = OFF, 1 = Optimum Start, 2 =
Delayed Start. Select your preference.
4. Press the SET button to exit.
5. When running in Optimum Start or Delayed Start mode,
"P" will flash on display.
15