6. Once Monday's time and temperatures have been
adjusted to desired settings and 1 (Monday) is flashing,
repeat steps 2 to 4 until all 7 days of the week have been
set to desired times and temperatures.
7. When all 7 days, time and temperatures have been set
to desired settings, press SET to confirm settings and return
the programmer to Run Mode.
①
②
③
Changing the Programme: 5/2 Day
Mon—Fri
1. Press and hold SET then press PROG until the days of the
week are flashing (1,2,3,4,5,6,7).
2. Release SET button then press + or – until 1,2,3,4,5
(Mon—Fri) symbols are flashing ① (Fig. 8, page 13).
Press PROG once and the time will flash ② (Fig.8). Use +
or – to adjust the first time to required setting.
3. Press PROG once and the temperature will flash ③
(Fig.8). Use + or - to adjust the temperature.
4. Repeat steps 2 to 3 above until all 6 time and tempera-
ture settings above have been set for 1,2,3,4,5 (Mon - Fri).
5. Once Mon—Fri times and temperatures have been
Fig. 7
12