Setting The Time And Date; Changing The Programme: 7 Day - ESI ESRTPRF User And Installation Instructions Manual

Setting the Time and Date

The time and date are factory set so it will not normally be
necessary to do this on site. Changes between summer and
winter time are handled automatically by the unit.
1. Press SET to make sure the programmer is in Run Mode.
2. Press DAY once until the year date is flashing, use + or –
to adjust the year.
3. Press DAY once until the month date is flashing, use + or
– to adjust the month.
4. Press DAY once until the day date is flashing, use + or –
to adjust the day.
5. Press DAY once until the hour symbol is flashing, Use + or
– to adjust the hour.
6. Press DAY once until the minute symbol is flashing, use +
or – to adjust the minutes.
7. Press SET to confirm changes and return to run mode.

Changing the Programme: 7 Day

1. Press and hold SET then press PROG until the days of the
week are flashing (1,2,3,4,5,6,7).
2. Release SET button then press + or – until 1 (Monday) is
flashing ① (Fig.7, page 12).
3. Press PROG once and the time will flash ② (Fig.7). Use
+ or – to adjust the first time to required setting.
4. Press PROG once and the temperature will flash ③
(Fig.7). Use + or – to adjust the temperature.
5. Repeat steps 3 to 4 above until all 6 time and tempera-
ture settings above have been set for Monday.
11