In Printer Power On State - Toshiba B-EP Series Key Operation Specification

7.2 IN PRINTER POWER ON STATE

(1) The AC adapter is connected:
LCD
The external power source mark turns on and the battery level mark blinks.
When the battery is fully charged, both the external power source mark and the battery level
mark turn on.
LED
[STATUS] LED (green)
[CHARGE] LED (orange)
* If the battery is detached under the above condition, a charge error will result.
(For details about the charge error, refer to "5.21 Charge Error Number List" of this
specification and Chapter 9. Error Processing of the External Equipment Interface
Specification [EAA-02465].)
In normal state ................ ON
Charging ......................... ON
Full charge ...................... OFF
- 218 -