Font Zero Setting (Zero Font) - Toshiba B-EP Series Key Operation Specification

6.6.3.2.3 Font Zero Setting (ZERO FONT)

This setting determines how zero should be displayed/printed, "Ø" (with slash) or "0" (without
slash).
Z E R O
Z E R O
Default value: 0 (Without slash)
<Supplemental Explanations>
When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
F O N T
[PAUSE]
F O N T
[PAUSE]
- 84 -
0 0: Without slash
Ø Ø: With slash