Toshiba B-EP Series Key Operation Specification page 68

Item
CODE
EURO CODE
AUTO HD CHK
MAXI CODE SPEC.
HEAD DIVISION
HEAD ERR CHECK.
HEAD ERR PRINT
FEED CHECK
B-SP MODE
LINERLESS
PAPER STOP
* Supported on V1.0E or later
BF.RESTRICT
* Supported on V1.0E or later
PEEL BF.
* Supported on V1.0E or later
XML
BEEP VOL
AUTO POWER OFF
SLEEP
LCD LIGHT OFF
Description
Control code
EURO font code
Automatic print head check for
broken dots
MaxiCode specification
Head division
Print head check for broken dots
after cover close
Resume printing after broken dots
error
Feed to top of feed after cover
close
B-SP series compatibility mode
Linerless
Post-print stop position setting
Back feed restriction setting
Strip issue back feed setting
XML
Beep (buzzer) volume
Auto power-off timing
Power save mode timing
LCD backlight off timing
- 59 -
Value
AUTO: Automatic selection
ESC LF NUL: ESC LF NUL method
{ | }: { | } method
Any code
OFF: An automatic print head check
for broken dots is not
performed.
ON: An automatic print head check
for broken dots is performed.
TYPE1: Compatible with existing
versions
TYPE2: Special specification
B-EP2 (2-inch) B-EP4 (4 inch)
AUTO1 AUTO1
AUTO2 DIV6
DIV3 AUTO
AUTO
OFF: A print head check for broken
dots is not performed after the
cover is closed.
ON: A print head check for broken
dots is performed after the
cover is closed.
OFF: The printer does not resume
printing after a broken dots
error occurs.
ON: The printer resumes printing
after a broken dots error
occurs.
OFF: No feed is performed after the
cover is closed.
ON: A feed is performed after the
cover is closed.
OFF: B-SP series compatibility
mode is disabled.
ON: B-SP series compatibility
mode is enabled.
OFF: Linerless setting is disabled.
ON: Linerless setting is enabled.
CUT: Stop at the cut position
HEAD: Stop at the head position
ON: Back feed restricted
OFF: No back feed restricted
OFF: Back feed allowed
ON: No back feed allowed
OFF: XLM setting is disabled.
ON: XLM setting is enabled.
OFF
1 to 3
OFF
1 to 300 min.
1 to 30 sec.
OFF
1 to 30 sec.