Toshiba B-EP Series Key Operation Specification page 34

N O W P R I N T I N G . . .
P R I N T A L L
< 5 > D U M P
< 1 > R E S E T
O N L I N E
NOTE: If an error occurs when the printer is printing the data dumped from the receive buffer, the
printer displays an error message, then stops. The error is cleared by pressing the [PAUSE]
key, and the display returns to the receive buffer dumping menu "<5> DUMP MODE".
After recovering from the error, the printer does not automatically resume printing.
[FEED]
M O D E
[POWER]
[POWER]
(22) Start of printing the remaining receive buffer
data
(23) Print method setting (print all) display
(24) Press the [FEED] key.
(25) After printing is completed, the display returns
to the receive buffer dumping menu.
(26) Hold down the [POWER] key for 3 seconds or
more.
(27) The reset menu is displayed.
(28) Press the [POWER] key.
(29) The printer returns to the same state as when
the power is turned off and on again.
- 25 -