Print Type Setting (Batch/Strip) (Type) - Toshiba B-EP Series Key Operation Specification

6.6.5.2.5

Print Type Setting (BATCH/STRIP) (TYPE)

This setting selects a print type, auto mode using the strip sensor or fixed mode (BATCH or
STRIP) regardless of a sensor status.
T Y P E
T Y P E
T Y P E
Default value: AUTO (Print depending on the sensor used)
<Supplemental Explanations>:
When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
The default value at power on is AUTO (Print depending on the sensor used).
A U T O
[PAUSE]
B A T C H
[PAUSE]
S T R I P
[PAUSE]
- 118 -
Print depending on the sensor used
Fixed to batch issue
Fixed to strip issue