Siemens SINUMERIK 840D sl Operation/Programming Manual page 410

Examples
11
11.1 Standard machining processes
4. Input of blank contour with
contour computer
11-410
Press the
Press the
Contour name (here: Input Cont_1)
Press the
Determine the starting point of the contour:
X
Z
Press the
Input the following contour elements and confirm each with the
softkey:
1. Z -40 abs
2. X 80 abs
3. Z -65 abs
4. X 90 abs
5. Z -95 abs
6. X 0 abs
7. Z 0 abs
8. X 60 abs
Press the
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
softkey
New
contour
softkeys
softkey
60 abs
0 abs
softkey
Z -45 abs
Z -70 abs
Z 0 abs
softkey
♥ Siemens AG, 2005. All rights reserved
08/2005
11