Siemens SINUMERIK 840D sl Operation/Programming Manual page 350

G Code Program
7
7.3 G-code editor
G code: Copying
Copy
G code: Pasting
Insert
G code: Cutting
Cut
G code: Find
Search
Find next
7-350
Select the G code that you want to copy.
Press the "Copy" softkey.
The G code is stored in buffer memory and remains there even if you
switch to another program.
Copy the G code that you want to insert.
Press the "Insert" softkey.
The copied G code is pasted from buffer memory into the text in front
of the cursor.
Select the G code that you want to cut.
Press the "Cut" softkey.
The selected G code is removed and stored in buffer memory.
Press the "Search" softkey.
A new vertical softkey bar appears.
Enter the character string that you want to locate.
Press the "OK" softkey.
The G code program is searched for the character string in the
forward direction. The character string is marked in the editor by the
cursor.
Press the "Find next" softkey to continue the search, as
necessary.
The next character string found is displayed.
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
7
♥ Siemens AG, 2005. All rights reserved