Siemens SINUMERIK 840D sl Operation/Programming Manual page 319

08/2005
5
Parameters
Function Select from five different functions:
Gripping:
Park position WCS: The park position is entered into the workpiece coordinate system
MCS:
of the park position and the angular offset is possible
XP Park position of the tool in the X direction (abs)
ZP Park position of tool in Z direction (abs)
Rinse chuck Rinse counterspindle chuck or not
S Spindle speed (main spindle and counterspindle)
Direction of Direction of rotation (main spindle and counterspindle):
rotation
α1
Angular offset of counterspindle on gripping
Transfer position (abs.)
Z1
Position at which traversal at reduced feedrate starts (abs or inc)
ZR
Reduced feedrate
FR
Yes:
Fixed stop
No:
Pulling:
Work offset Work offset in which the coordinate system displaced by Z1 must be saved.
Z1 Amount by which the workpiece is pulled out of the main spindle (inc)
F Feedrate
Rear side:
Work offset Work offset in which the coordinate system, which was shifted according to ZW and
by ZV as well as mirrored in Z, must be saved.
ZnW Machining position for special axis (abs.); machine coordinating system
ZV Workpiece zero offset in Z direction (inc, the sign is also evaluated)
Front face:
Work offset Work offset for machining the next front face
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition

Gripping

Pulling

Rear side

Front side

Complete
The park position is entered into the machine coordinate system; teaching
Direction of rotation clockwise (right)
Direction of rotation counterclockwise (left)
No spindle rotation
The counterspindle comes to a halt a specified distance from the
transfer position Z1 and then traverses at the specified feedrate
as far as the limit stop.
The counterspindle traverses to the transfer position Z1.
5.9 Machining with the counterspindle
Description
ShopTurn Functions
5
Unit
mm
mm
rpm
Degrees
mm
mm
mm/min
mm
mm/min
mm
mm
5-319