Siemens SINUMERIK 840D sl Operation/Programming Manual page 159

08/2005
5
Rapide
traverse
Parameters
X Target position in the X direction (abs or inc)
Incremental dimensions: The plus/minus sign is evaluated.
Z Target position in the Z direction (abs or inc)
Incremental dimensions: The plus/minus sign is evaluated.
Y Target position in the Y direction (abs or inc)
Incremental dimensions: The plus/minus sign is evaluated.
C1 Target position of C axis of main spindle (abs or inc)
Incremental dimensions: The plus/minus sign is evaluated.
C3 Target position of C axis of counterspindle (abs or inc)
Incremental dimensions: The plus/minus sign is evaluated.
Z3 Target position of special axis (abs or inc)
Incremental dimensions: The plus/minus sign is evaluated.
F Machining feedrate
Radius Input defining which side of the contour the tool machines in the programmed
compensation direction:
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
5.1 Straight or circular path movements
Press the "Strai. Circle" and "Straight" softkeys.
Straight >
Press the "Rapid traverse" soft key if you want to use rapid
traverse instead of a programmed machining feedrate.
Radius compensation to right of contour
Radius compensation to left of contour
Radius compensation off
The previously programmed setting for radius compensation is used
Description
ShopTurn Functions
5
Unit
mm
mm
mm
mm
mm
mm
mm/rev
mm/min
mm/tooth
5-159