Siemens SINUMERIK 840D sl Operation/Programming Manual page 24

Introduction
1
1.2 Workstation
1-24
Ctrl
Use the following key combinations to navigate in the process plan
and in the G code editor:

Ctrl + Home: Jump to the beginning.

Ctrl + End: Jump to the end.
Alt
Has no meaning for ShopTurn.
Del

Deletes the value in the parameter field.

In insertion mode, it deletes the character marked by the cursor.

Deletes the machining lines during parallel drawing and in the
simulation.
Insert
Activates insertion mode or the pocket calculator.
Input

Terminates entry of a value in the input field.

Opens a directory or program.
Alarm - only OP 010 and OP 010C
Opens the "Messages/Alarms" operating area.
This key has the same function as the "Alarm list" softkey.
Program - only OP 010 and OP 010C
Opens the "Program" operating area.
This key has the same function as the "Prog. edit" softkey.
Offset - only OP 010 and OP 010C
Opens the "Tools/Offsets" operating area.
This key has the same function as the "Tool zero point" softkey
Program Manager - only OP 010 and OP 010C
Opens the "Program Manager" operating area.
This key has the same function as the "Program" softkey.
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
1
♥ Siemens AG, 2005. All rights reserved