Siemens SINUMERIK 840D sl Operation/Programming Manual page 293

08/2005
5
DZ Maximum depth infeed (Z direction)
UXY Finishing allowance in plane
UZ Finishing allowance in depth
Peripheral surface/Peripheral surface C:
Cylinder diameter ¬ (abs.)
X0
Depth with reference to X0 ¬ (abs. or inc.)
X1
DYZ
Maximum infeed in the YZ plane
Plane infeed in %: Ratio of plane infeed (mm) to milling cutter diameter (mm)
DX
Maximum depth infeed (X direction)
UYZ
Finishing allowance in plane
UX
Finishing allowance in depth
End face Y:
CP Reference point
Z0 Reference point in Z direction (abs.)
Z1 Depth with reference to Z0 (abs. or inc.)
DXY Maximum infeed in the XY plane
Plane infeed in %: Ratio of plane infeed (mm) to milling cutter diameter (mm)
DZ Maximum depth infeed (Z direction)
UXY Finishing allowance in plane
UZ Finishing allowance in depth
Peripheral surface Y:
C0 Reference point
X0 Reference point in X direction (abs.)
X1 Depth with reference to X0 (abs. or inc.)
DYZ Maximum infeed in the YZ plane
Plane infeed in %: Ratio of plane infeed (mm) to milling cutter diameter (mm)
DX Maximum depth infeed (X direction)
UYZ Finishing allowance in plane
UX Finishing allowance in depth
Starting point Determine start point automatically or enter it manually
Manual entry allows for a start point outside the pocket, whereby straight line
machining into the pocket is performed first, e.g. for a pocket with a side opening
without any insertion.
X Start point X (abs.) – (only for end face/end face C and end face Y with manual start
point)
Y Start point Y (abs.) – (only for end face/end face C and end face Y with manual start
point)
Y Start point Y (abs.) – (only for peripheral face/peripheral face C and peripheral face
Y with manual start point)
Z Start point Z (abs.) – (only for peripheral face/peripheral face C and peripheral face
Y with manual start point)
♥ Siemens AG, 2005. All rights reserved
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
ShopTurn Functions
5.6 Contour milling
5
mm
mm
mm
mm
mm
mm
%
mm
mm
mm
Degrees
mm
mm
mm
%
mm
mm
mm
Degrees
mm
mm
mm
%
mm
mm
mm
mm
mm
mm
mm
5-293