Box Position Pattern - Siemens SINUMERIK 840D sl Operation/Programming Manual

ShopTurn Functions
5
5.2 Drilling

5.2.11 Box position pattern

Parameters
Position Select from 8 different positions:








End face/End face C:
Z0 Z coordinate of the reference point (abs.)
X0 X coordinate of the reference point – first position (abs.)
Y0 Y coordinate of the reference point – first position (abs.)
α0
Angle of rotation of box
Positive angle: Box is rotated counterclockwise.
Negative angle: Box is rotated clockwise.
αX
Shear angle of box relative to X axis
Positive angle: Box is rotated counterclockwise.
Negative angle: Box is rotated clockwise.
αY
Shear angle of box relative to Y axis
Positive angle: Box is rotated counterclockwise.
Negative angle: Box is rotated clockwise.
Column spacing in X direction
L1
Line spacing in Y direction
L2
Number of columns in X direction
N1
Number of lines in Y direction
N2
5-186
You can use this function to program any number of positions spaced
at an equal distance along on a box. The spacing may be different on
both axes.
If you want to program a rhombus-shaped box, enter the angle
αY.
Press the "Drilling", "Positions" and "Line/Matrix/Box" soft keys.
Positions >
Select the "Box" position pattern in the "Line/Matrix/Box"
parameter field.
End face/End face C – Front
End face/End face C – Rear
Peripheral surface/Peripheral surface C – Inner
Peripheral surface/Peripheral surface C – Outer
End face Y – Front (only when Y axis exists)
End face Y – Rear (only when Y axis exists)
Peripheral surface Y – inner (only when Y axis exists)
Peripheral surface Y – Rear (only when Y axis exists)
Description
SINUMERIK 840D sl Operation/Programming ShopTurn (BAT) – 08/2005 Edition
08/2005
5
αX or
Unit
mm
mm
mm
Degrees
Degrees
Degrees
mm
mm
♥ Siemens AG, 2005. All rights reserved