UX5000
___________________________________________________________________________________
___________________________________________________________________________________
Multimedia Conference Bridge Installation Manual
6.2.1
Conference Parameters
Conference
Settings window. Conference bridge access codes and the
geographic location are assigned using the DTMF Configuration and
Locale Configuration options.
6.2.1.1
DTMF (Access Code) Configuration
The DTMF Configuration window, accessed from the
Conference Settings window, allows the administrator to
configure the DTMF (Access) codes for the conference bridge.
The conference parties should be using this configured DTMF
codes during the conference for various operations. DTMF is a
2-character numeric identifier, which uniquely identifies the
operation the conference participant intends to perform. The
values show in
Window
by the technician.
Figure 5-24 DTMF (Access Code) Configuration Window
Parameters are accessed from the Conference
Figure 5-24 DTMF (Access Code) Configuration
are the default values. These values can be changed
Issue 1.0
5 - 33