Chapter 1 Loading The Compactflash Application In The Pvau; Description; Loading The Service Package - NEC UX5000 Installation Manual

C h a p t e r 1
C h a p t e r 1
__________________________________________________________________________________
S 1 D
ECTION
The PVAU blade provides the hardware platform for providing connectivity for the
system. By default, this blade is shipped from NEC with "platform support" (factory
default) firmware. A functional firmware is loaded as part of the installation to support
the desired functionality.
In this document, the procedure for loading a CompactFlash (CF) into the PVAU is
provided. The same procedure applies for any other applications (e.g., IVR).
✎
✎
S 2 L
ECTION OADING THE
1.
2.
3.
4.
___________________________________________________________________________________
Multimedia Conference Bridge Installation Manual
Loading the CompactFlash Application
in the PVAU
ESCRIPTION
Verify the firmware prior to installing the application.
Access to this website requires technician login privileges.
S
ERVICE
Ensure the Compact flash is removed. Insert the blade in any interface slot in
the chassis.
The blade Default IP Address is: 192.168.1.100 . Set your PC so that it is
statically assigned an IP address of 192.168.1.xx with a subnet mask of
255.255.255.0 to ensure it is in the same network as the PVAU blade.
Point the Internet Explorer (Version 5 or higher) on the PC to 192.168.1.100 by
entering this address in the navigation bar.
✎
The Internet Explorer must not use any Proxy settings.
Login using the following information:
Default Login ID = admin (lowercase)
Default Password = password (lowercase)
P
ACKAGE
1 - 1