Connectors; Environmental Conditions - NEC UX5000 Installation Manual

Issue 1.0
___________________________________________________________________________________
2.2
2.3
___________________________________________________________________________________
2 - 4

Connectors

Ethernet Connector
The Multimedia Conference Bridge Application has a single 10/100 MPS
Ethernet connector. The port has Auto-MDIX (Auto-Medium Dependent
Interface Crossover) giving users the ability use either a straight-through
Ethernet cable or a crossover Ethernet cable. A crossover cable is not
required for direct connection to a PC.
The Ethernet Interface setting allows for manual configuration of the
Ethernet port mode/speed from the Web Interface. This can be set to
operate in the following port speed and duplex mode: 10MB/Full Duplex,
10MB/Half Duplex,
Auto-Negotiate.
Serial Connector
A 10-pin header (J2) provides access to a serial terminal on the
Multimedia Conference Bridge Application blade. The serial connector
is used for debug operations only.

Environmental Conditions

The following environmental conditions apply for the operation:
Operating Temperature: +32
Operating Humidity:
100MB/Half Duplex,
° ° °
to 104 F (0 to 40
10% to 90% (non-condensing)
Multimedia Conference Bridge Application
UX5000
100MB Full Duplex,
°
C)