Data Transmission Between Trovis-View And The Actuator (Connecting Cable) - Samson 5757-7 Mounting And Operating Instructions

Data transmission
NOTICE
Data transmission is only possible after the electrical connection has been made as described
in section 4 and the device is ready for operation.
8.1 Data transmission between TROVIS-VIEW and the actuator
(connecting cable)
1. Connect the serial port of the computer
using the SAMSON connecting cable to
the serial interface connection of the ac-
tuator.
2. Select Communications in Options menu
to open the server settings window. Click
Server settings button.
3. Check Local connection and Auto-
matically local connect boxes and click
on OK button to confirm server settings.
The Communication window reappears.
4. Click Port settings button.
5. The settings window opens and
State: not yet searched appears in the
Automatic detection field.
Click on Start button.
TROVIS-VIEW has found the actuator
when State: Device found on ....
appears, click on OK button twice to
confirm settings.
44
EB 5757-7 EN