Wiring (Installation) - Siemens Acvatix SAX Series Basic Documentation

Preparation of wire
endings
Communicating
actuators
44 / 92
Siemens
Building Technologies
3.1.9

Wiring (installation)

Conduct the electrical connections in accordance with local regulations on
electrical installations as well as the "Connection diagrams" on page 81.
The cable endings must be prepared before as
follows.
Cable glands (not contained in scope of delivery)
Metric
M20
Prior to installation, the following preconditions must be satisfied:
· Actuator is mechanically connected to a Siemens valve.
· Housing cover is removed (step 6 "Special notes on mounting", page 36).
Actuators SAX.., SAY.., SAV.., SAL.. for valves
Handling
EU: M20
A Standard
US: ½"
Ground cable
EU: M25
B for outdoor
US: ½"
installation
EU: M20
C
US: ½"
Metric
M25
Device contains fixed connecting
cable. Left cable duct used (A).
Connection
actuator
Connection
accessorie
s
Inch thread
½"
CE1P4040en
2018-12-05