Maintenance; Disposal - Siemens Acvatix SAX Series Basic Documentation

52 / 92
Siemens
Building Technologies
Set address "50":
1. Enable addressing mode
2. Skip over 1st digit: Press button until LED is
3. Enter the 2nd digit: Press button 5x à LED blinks
pressed
4. Save address (skip 3rd digit): Press button until LED is
à The address is saved and displayed 1x for confirmation
Set address "5":
1. Enable addressing mode
2. Enter the 1st digit: Press button 5x à LED blinks
pressed
Save address: Press button until LED is
à The address is saved and displayed 1x for confirmation
3.2.3

Maintenance

The actuators are maintenance-free.
3.2.4

Disposal

The device is considered electrical and electronic equipment for
disposal in terms of the applicable European Directive and may not
be disposed of as domestic garbage.
·
Dispose of the device through channels provided for this
purpose.
·
Comply with all local and currently applicable laws and
regulations.
Actuators SAX.., SAY.., SAV.., SAL.. for valves
Handling
green – release button
green each time the button is
red – release button
red each time the button is
red – release button
CE1P4040en
2018-12-05