Shutting Down And Restarting The Telepresence Server - Cisco TelePresence Server 7010 Product User Manual

Shutting down and restarting the TelePresence Server

You may need to shut down the TelePresence Server to restart it as part of an upgrade or to switch off its
power.
Note: Shutting down the TelePresence Server will disconnect all active calls.
To shut down the TelePresence Server:
1. Go to Configuration > Shutdown.
2. Click the Shut down TelePresence Server button.
The button changes to Confirm TelePresence Server shutdown.
3. Click the button again to confirm.
The TelePresence Server will begin to shut down. The banner at the top of the page will change to
indicate this.
When the shutdown is complete, the button changes to Restart TelePresence Server.
4. Click this button a final time to restart the TelePresence Server.
Cisco TelePresence Server Product User Guide
Configuration
Page 49 of 151