Cisco TelePresence Server 7010 Product User Manual page 41

Field Field description
Use panel This option controls the default layout
switched view as single-screen endpoints see when they
default connect. Participants can change their
layout using Far End Camera Control.
When selected, any single-screen
endpoint will use the panel switched view
upon connection. In this layout the loudest
participant appears full screen with
additional participants appearing in up to
nine equally sized overlaid panes at the
bottom of the screen.
Allow content in This feature allows the TelePresence
main video Server to send a conference's content
channel in the main video channel of
endpoints that don't support the extra
channel.
Endpoints that would otherwise be unable
to see the content channel can see it if
you enable this feature.
In these cases, the content channel video
is shown in the largest pane of a
composed layout. The content layout
replaces the main video while the content
channel is active (audio is unaffected).
Cisco TelePresence Server Product User Guide
Usage tips
When using the panel switched view, the
loudest panel/screen of a multi-screen
endpoint is displayed full-screen to single-
screen endpoints.
The panel switched view requires that the
multi-screen systems in the conference
send the TelePresence Server a loudest
panel/screen indication.
If multi-screen systems that do not provide
this indication are participating in a
conference, only the standard single-
screen continuous presence view of these
endpoints are available.
See the endpoint interoperability
reference for a list of the multi-screen
systems that reveal the loudest panel
information.
When content is shown in main video it
does not consume a content port.
The TelePresence Server can dynamically
apply this feature, if there is competition for
content ports, to maximize the chance of
all participants seeing the content.
Content does not entirely replace the main
video; the content displays in the largest
pane of a composed layout that also
shows the other participants' streams
across the bottom of the screen
about layouts).
This setting can be overridden by the
equivalent field in the endpoint's or
endpoint group's Configuration
For more information about the content
channel, see Content channel video
support.
Configuration
(more
page.
Page 41 of 151