Cisco TelePresence Server 7010 Product User Manual page 56

Conference status reference
Field Field description
Status The status of the conference:
Scheduled
n
Enabled
n
Active
n
Inactive
n
Completed
n
H.323 The status of a conference with respect to
gatekeeper its H.323 gatekeeper.
status
Cisco TelePresence Server Product User Guide
Status
Usage tips
Conferences can be:
Active (<X> endpoints) - due to end
n
<time>: this conference is in progress and
has a scheduled end time.
Active - permanent: this is a permanent
n
conference which has past its start time but
may or may not have any active
participants.
Inactive: this conference does not have a
n
scheduled start or end time, nor a numeric
ID. It can only be started from the
conference's status or configuration pages.
Enabled: this conference does not have a
n
scheduled start or end time but has a
numeric ID, therefore an endpoint can call
to the TelePresence Server with this
numeric ID and start the conference. It will
then be shown as Active (<X> endpoints)
while there are active participants.
Completed: this conference had a
n
scheduled end time which has passed.
The status may have additional information
about the conference duration, and whether
it is locked and for how long. For example,
Inactive - Due to end in 5 hours and 27
minutes [Locked - will be unlocked in 2 hours
and 7 minutes].
One of:
Numeric ID registered
n
Numeric ID failed to register
n
Not registered: conference is not
n
configured to register with the gatekeeper
Registering: conference is in the process
n
of registering
If the TelePresence Server can connect to an
H.323 gatekeeper, the name and numeric ID
of a conference can be registered with that
gatekeeper as a different directory number.
This allows H.323 users to dial directly into a
particular conference.
To configure a H.323 gatekeeper, go to
Configuration > System
Conferences
settings.
Page 56 of 151