Adding And Configuring Rooms - Cisco TelePresence Server 7010 Product User Manual

Adding and configuring rooms

Note: The Rooms > pages are only available if your TelePresence Server has the Third party interop
feature key installed. You can see which keys are installed on
Each room has an endpoint and a user account associated with it. A users who log into the TelePresence
Server with this account can create a conference that includes the room's endpoint. The user can invite
other endpoints or endpoint groups that you have selected for use with this room.
Adding a new room
1. Go to Rooms > Add new
2. Supply the room details, referring to the following table if necessary.
3. Click Add new room.
The room exists now but you stay on the configuration page so you can add pre-configured endpoints.
4. Click Add pre-configured participants.
5. Select endpoints that this room will be able to invite into ad hoc conferences.
6. Click Update conference.
The list of Pre-configured participants now shows all the endpoints that users from this room can
call into ad hoc conferences.
Updating a room
1. Go to Rooms.
2. Click the name of the room you want to update.
3. Modify the details as required, referring to the following table if necessary.
4. Click Modify room.
Cisco TelePresence Server Product User Guide
room.
Configuration > Upgrade.
Rooms
Page 107 of 151