Cisco TelePresence Server 7010 Product User Manual page 18

Field Field description
Ethernet Select Automatic or Manual.
settings
If you select Manual, you must also supply
the speed and duplex settings. Select
Automatic if you want this Ethernet port to
automatically negotiate its Ethernet settings
with the connected device.
Speed Set the connection's speed to 10 Mbit/s or
100 Mbit/s. Select automatic negotiation if
you require a connection speed of 1000
Mbit/s.
Duplex Set the connection's duplex mode to Full
duplex or Half duplex.
Cisco TelePresence Server Product User Guide
Ethernet configuration
Usage tips
It is important that the devices at either end of
the Ethernet connection have the same
settings. That is, configure both devices to
use automatic negotiation, or configure them
both with the same fixed speed and duplex
settings.
The connection speed setting must be the
same for the ports at both ends of this
connection.
The connection duplex setting must be the
same for the ports at both ends of this
connection.
Full duplex mode allows simultaneous
bidirectional transmission, while half duplex
mode only allows bidirectional transmission
that is not simultaneous.
Network settings
Page 18 of 151