Configuring Ncs 1001 Using Data Models; Supported Yang Models In Ncs 1001 - Cisco NCS 1001 Configuration Manual

Configuring NCS 1001 Using Data Models

This section includes examples for configuring NCS 1001 using Data models.
•
•
•
•
•
•
•
•
•

Supported YANG Models in NCS 1001

The supported configuration and operational YANG models for NCS 1001 are listed below.
Cfg. yang
Cisco-IOS-XR-ncs1001-ots-cfg.yang
Cisco-IOS-XR-ifmgr-cfg.yang
Cisco-IOS-XR-controller-optics-cfg.yang
Cisco-IOS-XR-pmengine-cfg.yang
Supported YANG Models in NCS 1001, page 13
Configure Amplifier Module, page 14
Remove Amplifier Configuration, page 14
Configure Protection Switching Module, page 15
Remove Protection Switching Module Configuration, page 16
Configure OTS Controller, page 17
Display Parameters of OTS Controllers, page 23
Display Parameters of OTS OCH Controllers, page 24
View PM Parameters for OTS Controllers, page 25
3
C H A P T E R
Oper. yang
Cisco-IOS-XR-controller-optics-oper.yang
Cisco-IOS-XR-pmengine-oper.yang
Cisco-IOS-XR-plat-chas-invmgr-oper.yang
Cisco-IOS-XR-alarmgr-server-oper.yang
Data Models Configuration Guide for Cisco NCS 1001
13