Speeding Up One-Touch Dial For Telephone Calls; Changing The Remote Control Code - Olivetti OFX 1100 Instructions Manual

SPEEDING UP ONE-TOUCH DIAL FOR
TELEPHONE CALLS ...
For security reasons the fax machine is set to carry
out one-touch dial only after the START key has been
pressed.
If you wish to deactivate the protection proceed as
follows:

CHANGING THE REMOTE CONTROL CODE ...

If the fax machine is connected to a secondary tele-
phone operating in tone dialling and set for manu-
al reception or for automatic reception with rec-
ognition of the call type, whenever a remote party
calls to send a document, you can control its re-
ception by entering the code * * on the same sec-
ondary telephone. This operation is similar to press-
ing the START key on your fax.
You can replace the second asterisk of this code
with a digit from 0 to 9.
If your fax is also connected a an external an-
swering device, you should use a digit different
from the one used for the remote control of the
answering machine.
Proceed ad follows:
33