Table of Contents
Advertisement
ADJUSTING THE CONTRAST AND
RESOLUTION OF A DOCUMENT TO BE
TRANSMITTED OR COPIED ...
Before transmitting or copying a document you can
make certain adjustments in order to optimize the
print quality.
In particular, you can adjust the print contrast by
means of the CONTR. key for choosing lighter or
darker tones and the RESOL. key to adjust the reso-
lution of the characters by setting higher or lower
resolution values depending on the type of text or
images in the document.
Select the type of contrast as follows:
•
NORMAL, if the document is neither too light nor
too dark . The upper row of display shows "DOCU-
MENT READY" and the lower "NORMAL".
•
LIGHT, if the document is particularly dark. The
upper row of display shows "DOCUMENT
READY" and the lower, "LIGHT".
•
DARK, if the document is particularly light. The
upper row of display shows "DOCUMENT
READY" and the lower, "DARK".
When the fax machine has finished a transmis-
sion or a copy, it always restores the default con-
trast value: NORMAL.
Select the type of resolution as follows:
•
STD (STANDARD), if the document is easily
readable. The upper row of display shows
"DOCUMENT READY " and the lower row, an
arrow in correspondence with the indication "STD"
on the console.
•
FINE, if the document contains very small char-
acters or drawings. The upper row of display
shows "DOCUMENT READY " and the lower row,
an arrow in correspondence with the indication
"FINE" on the console.
•
HALF TONES, if the document contains shades.
The upper row of display shows "DOCUMENT
READY " and the lower row, an arrow in corre-
spondence with the indication "HALF TONES" on
the console.
If you do not select the resolution type, the fax
machine automatically carries out the transmis-
sion or the copy based on the pre-set values (see
the section" Setting Automatic Resolution").
28
SETTING AUTOMATIC RESOLUTION ...
If you have not selected the resolution before trans-
mitting or copying a document, the fax machine will
automatically transmit or copy based on the pre-
set value (in this case: STANDARD).
If you like, you can set the fax machine to transmit or
copy automatically with FINE resolution using the
following procedure:
Advertisement
Table of Contents
