Connections For An A/B Roll Editing System - Sony DVCAM DSR-60P Operating Instructions Manual

Connections for an A/B Roll Editing System

The following is an example configuration of A/B roll
editing system using the DSR-60/60P and DSR-85/
85P.
In this configuration, the DSR-60/60P is used as player
1, the UVW-1600/1600P (an analog Betacam
videocassette player) as player 2, and the DSR-85/85P
as recorder. To create a final tape (a tape that contains
a completely packaged program) in Betacam format,
you can use a Betacam VCR such as the UVW-1800/
1800P as the recorder.
Main video monitor
Video signal generator
(Sony Tektronix TSG-
130, etc.)
DFS-500/500P
DME Switcher
Video signal
Audio signal
Reference video signal
Control signal
The purpose of the following figure is to clearly
indicate the flow of signals among the component
devices in this system. The specific connections and
DSR-60/60P settings for this system are described on
the following pages.
6
PVE-500, etc
(Editing controller)
6 0
DSR-60/60P (player 1)
a) When using a DFS-500/500P DME Switcher, the phase of the
Audio monitor system
Source video
monitor
DSR-85/85P
(recorder)
DPS-D7 or other
delay unit
0 ) p r
) p
video signals processed by the DFS-500/500P is delayed,
which means that a delay unit must be connected between the
MXP-290 Audio Mixer's output and the audio input in the DSR-
85/85P (recorder).
Chapter 5 Connections and Settings
a)
MXP-290 Audio
Mixer
UVW-1600/
1600P
(player 2)
43