High-Speed And Low-Speed Search: Quickly And Accurately Determining Editing Points; Search Operations Via External Equipment; Search Operations On This Unit - Sony DVCAM DSR-60P Operating Instructions Manual

High-Speed and Low-Speed Search: Quickly and
Accurately Determining Editing Points
Use the search function to easily locate the desired
scene and to quickly and accurately determine edit
points.
Search Operations via External
Equipment
You can control the following operation modes of the
unit either from an editing controller (such as the ES-7,
PVE-500, etc.) connected to the REMOTE connector
on the rear panel or from a SIRCS-system remote
controller (such as the SVRM-100A) connected to the
CONTROL S connector on the front panel.
Shuttle : Use this mode to view color playback at
speeds ranging from 0 to 32 times normal in both
directions.
Note
When controlling the unit from the SVRM-100A
for a shuttle-mode search, the maximum possible
search speed is 16 times normal in both directions.
If you want a faster search than this, hold down
the F FWD or REW button. This allows you to
view a color playback at 32 times normal in
forward or reverse direction.
Jog: Use this mode for low-speed search and frame-
by-frame search.
Digital slow: Use this mode for noise-free color
playback at speeds ranging from 0 to
both directions.
Still: Use this mode to view a still picture of any
field.
Jog audio: Use this mode to monitor the audio track
at speeds ranging from normal to
both directions.
Note
When controlling this unit from external equipment, be
sure to set the REMOTE/LOCAL switch on the unit's
front panel as follows:
External equipment
Editing controller connected to
REMOTE connector
SIRCS-system remote controller
connected to CONTROL S connector
For a description of search operations via external
equipment, see the equipment's operating instructions.
You can use the F FWD button and REW button for
high-speed searching. When using these buttons for
high-speed searches, be sure to set the REMOTE/
LOCAL switch on the front panel to LOCAL.
To do a forward high-speed search
Press and hold the F FWD button. While you are
holding down the button, you can view the color
playback, which is advancing 32 times normal speed.
To do a reverse high-speed search
Press and hold the REW button. While you are
holding down the button, you can view the color
playback, which is going at 32 times normal speed in
reverse direction.
1 / normal in
5
1
/ normal in
30
REMOTE/LOCAL
switch setting
REMOTE
LOCAL

Search Operations on This Unit

Chapter 3 Convenient Functions for Editing Operation
29