Sony DVCAM DSR-60P Operating Instructions Manual page 9

1 Display section and COUNTER SELECT button
1 Audio level meter
2 AUDIO MODE display
AUDIO MODE
dB dB dB dB
OVER OVER OVER OVER
0 0 0 0
-12 -12 -12 -12
2CH
-20 -20 -20 -20
-30 -30 -30 -30
-40 -40 -40 -40
4CH
-60 -60 -60 -60
CH-1 CH-2 CH-3 CH-4
!º COUNTER SELECT button
9 REPEAT indicator
8 REMOTE indicator
1 Audio level meter
Indicates the playback level during playback. When
the audio level exceeds 0 dB, the OVER indicator
lights.
The short bars to the left of some level indication bars
indicate that those levels are reference audio recording
levels.
2 AUDIO MODE display
During playback this indicates the audio mode in
which the tape was recorded.
[2CH] and [Fs48k] indicators: Light during playback
of audio recordings made in 2-channel (48 kHz)
mode.
[2CH] and [Fs44.1k] indicators: Light during
playback of audio recordings made in 2-channel
(44.1 kHz) mode.
[4CH] and [Fs32k] indicators: Light during playback
of audio recordings made in 4-channel (32 kHz)
mode.
Fs48k
Fs44.1k
Fs32k
COUNTER SELECT
3 Time data type indicators
4 Time counter display
COUNTER
TC
U-BIT
REPEAT HOURS MINUTES SECONDS FRAMES
REMOTE ClipLink
6 0 ) p
6 Cassette memory indicator
7 ClipLink indicator
3 Time data type indicators
One of the three indicators (COUNTER, TC, and U-
BIT) lights to indicate the type of time data currently
shown in the time counter display.
COUNTER: CNT (count value of the time counter)
TC: SMPTE time code (DSR-60) or EBU time code
(DSR-60P)
U-BIT: User bit data
4 Time counter display
Indicates the following:
• Time data: CNT, time code, or user bit data
• Digital hours meter's count value: time total for
unit's operating hours, drum usage hours, etc.,
(selectable via the digital hours meter display menu).
• Error messages and alarm messages (see page 54)
5 Tape end alarm indicator L
Starts flashing when the tape's remaining capacity is
for about 2 minutes.
6 Cassette memory indicator
Lights when a cassette provided with a memory chip
("cassette memory") is loaded.
5 Tape end alarm indicator
TAPE
Chapter 1 Overview
9